Header Ads

How to Use Vaporesso VECO SOLO Kit - User Manual

Thank you for choosing Vaporesso Products! Please read this manual carefully to ensure proper use. For additional information or questions regarding to this product or its use, please visit www.vaporesso.com

Main features 

● Eco Universal Coil Inside
● Revolutionary Leak Free Design
● Top Air Flow
● Easy Coil Replacement System
● Pass-Through
● Sleek and Modern Design

Package Include 

1 x VECO SOLO with ECO Universal Coil preinstalled
1 x Extra ECO Universal Coil
1 x USB Charger Cable


Dimension: 22 x100mm
Weight: 82 +/-5 g
Standby Current:﹤30uA

Battery: Lithium 1500mAh Built In
Casting: Zinc Alloy and stainless steel
Thread: 510 thread Capacity: 2 ML

As a new member of the VECO family, VECO SOLO Kit by Vaporesso is sleeker in design while maintaining the smooth airflow. It adopts the ECO Universal Coil (EUC) so that you only need to replace the coil head inside without changing the metal sleeve that is truly ECO friendly. Combining the benefits of a Vapor Pen and an All-in-On, it has the tank built onto the base, so you could easily change the coil and or clear the tank whenever needed in a compact design. VECO SOLO, the one for you!

How to Use VECO SOLO Kit

1. Switch On/Off: 

Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses.

2. Vaping: 

Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.

3. Filling E-liquid: 

This easy top-fill tank will only ask of you to screw out the lid and fill in the chamber when the base is securely shut. Be sure to safely position the glass part when this process is in place to avoid spillage.

4. Changing Atomizer: 

Unscrew the tank from the base to remove and insert a new atomizer. Pull the EUC out from the base and insert a new one. Screw the Base on. Wait after replacing to make sure the coil is well primed.

5. Charging: 

Simply charge VECO SOLO Kit by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.

The LED Indicator will be white if the battery is more than 70%, turn blue if the battery is more than 30% and turn red if the battery is less than 30%.


Short Circuit Protection: 

1. When the short circuit occurs before working, the button light flashes for 5 times and there will be no output power.

2. Low Wattage Protection When the battery voltage is lower than 3V, the fire button light flashes for 3 times and the battery will be locked.

3. Over Vaping Protection When the fire button is pressed for more than 10 seconds, the light flashes 3 times then goes off. The battery will be locked.

4. Low Battery Protection When the battery is less than 10%, the light will flashes till it goes off completely

No comments

Powered by Blogger.